LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GS 460 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (1UR-FSE) - Circuit Tests And Repair Information >> Throttle Body >> On-Vehicle Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

On-Vehicle Inspection

  1. CHECK THROTTLE BODY 
    1. Check the throttle position sensor.
      1. Connect the Techstream to the DLC3.
      2. Turn the engine switch on (IG).
      3. Push the Techstream main switch ON.
      4. Enter the following menus: Powertrain/Engine/Data List/Throttle Sensor Position.
      5. Start the engine.
      6. Depress the accelerator pedal. When the throttle valve is fully opened, check that the value of the "Throttle Sensor Position" is within the specification.

        Standard throttle valve opening percentage: 60% or more 

        If the percentage is less than 60%, replace the throttle body.

scientia non olet · About LEMON Manuals