October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Integration Relay: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE COOL AIR INTAKE DUCT SEAL
(See REMOVAL
)
- REMOVE ENGINE ROOM SIDE COVER LH
(See REMOVAL
)
- REMOVE INTEGRATION RELAY
- Remove the engine room No. 1 relay block cover.
- Using a screwdriver, detach the 2 claws and disconnect the integration relay from the engine room No. 2 relay block.
- Disconnect the 3 connectors.