October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Engine Coolant Temperature Sensor: Removal
- DISCHARGE FUEL SYSTEM PRESSURE
(See REMOVAL
)
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE COOL AIR INTAKE DUCT SEAL
(See REMOVAL
)
- REMOVE ENGINE ROOM SIDE COVER RH
(See REMOVAL
)
- REMOVE ENGINE ROOM SIDE COVER LH
(See REMOVAL
)
- REMOVE V-BANK COVER
(See REMOVAL
)
- REMOVE FRONT UPPER FENDER PROTECTOR LH
(See REMOVAL
)
- REMOVE FRONT UPPER FENDER PROTECTOR RH
(See REMOVAL
)
- REMOVE FRONT FENDER TO COWL SIDE SEAL LH
(See REMOVAL
)
- REMOVE FRONT FENDER TO COWL SIDE SEAL RH
(See REMOVAL
)
- REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH
(See REMOVAL
)
- REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH
(See REMOVAL
)
- REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
(See REMOVAL
)
- DRAIN ENGINE COOLANT
(See REPLACEMENT
)
- DISCONNECT NO. 2 VENTILATION HOSE
(See REMOVAL
)
- REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE
(See REMOVAL
)
- REMOVE THROTTLE BODY
(See REMOVAL
)
- REMOVE INTAKE AIR SURGE TANK
(See REMOVAL
)
- REMOVE INTAKE MANIFOLD
(See REMOVAL
)
- REMOVE ENGINE COOLANT TEMPERATURE SENSOR
- Disconnect the sensor connector.
- Remove the sensor.
- Remove the gasket from the sensor.