Inspection Procedure

1. Clear the DTC (see DTC CHECK/CLEAR ).
2. Check the DTC (see DTC CHECK/CLEAR ).

   Result 

   RESULT REFERENCE
   
   

   Display (DTC Output)	Proceed To
   DTC (EPS control system) Is not output	A
   DTC (EPS control system) Is output	B (see DIAGNOSTIC TROUBLE CODE CHART )

B : REPAIR EPS CONTROL SYSTEM ACCORDING TO DTC OUTPUT 

A : Go to Next Step 

1. Clear the DTC (see DTC CHECK/CLEAR  ).
2. Turn the engine switch on (IG).
3. Check if the same DTC is recorded (see DTC CHECK/CLEAR  ).

   Result 

   RESULT REFERENCE
   
   

   Display (DTC Output)	Proceed To
   DTC (C1304/27) Is not output	A
   DTC (C1304/27) Is output	B

B :  Go to step  1

A : END