LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Seat Belt Control Ecu >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Seat Belt Control Ecu: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (See AIRBAG SYSTEM ).
  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT 
  3. REMOVE SPARE WHEEL COVER TRAY 
  4. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY  (See DISASSEMBLY )
  5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK  (See DISASSEMBLY )
  6. REMOVE REAR FLOOR FINISH PLATE  (See DISASSEMBLY )
  7. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH  (See DISASSEMBLY )
  8. REMOVE SEAT BELT CONTROL ECU 
    1. Disconnect the connector.
    2. Remove the 2 bolts.
    3. Disengage the claw and clip and remove the seat belt control ECU.
      Fig 1: Identifying Seat Belt Control ECU With Bolts, Clip And Claws
      G05252055Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals