LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 604 (Navigation (Service Information)) >> Navigation Ecu >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Navigation Ecu: Installation: Installation

WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NAVIGATION ECU 
    1. Install the navigation ECU with the 4 bolts.
      Fig 1: Identifying Navigation ECU With Bolts
      GTY151002Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connectors.
      Fig 2: Identifying Navigation ECU Connectors
      GTY150993Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL MULTI-DISPLAY ASSEMBLY 
  3. INSTALL NO. 2 RADIO BRACKET  . Refer to INSTALLATION - Step 6
  4. INSTALL NO. 1 RADIO BRACKET  . Refer to INSTALLATION - Step 7
  5. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY  . Refer to INSTALLATION - Step 8
  6. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL  . Refer to INSTALLATION - Step 40
  7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  . Refer to INSTALLATION - Step 41
  8. INSTALL CONSOLE BOX  . Refer to INSTALLATION - Step 42
  9. INSTALL CONSOLE BOX REGISTER ASSEMBLY  . Refer to INSTALLATION - Step 43
  10. INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY  . Refer to INSTALLATION - Step 44
  11. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)  . Refer to INSTALLATION - Step 45
  12. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)  . Refer to INSTALLATION - Step 46
  13. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)  . Refer to INSTALLATION - Step 47
  14. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission)  . Refer to INSTALLATION - Step 48
  15. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission)  . Refer to INSTALLATION - Step 49
  16. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) 
  17. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) 
  18. INSERT MAP DISC 
    1. Remove the clock assembly
      Fig 3: Identifying Clock Assembly
      GTY133058Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the engine switch on (ACC).
    3. Insert the map disc.
    4. Check that the wire harness is in the position shown in the illustration.
      Fig 4: Checking Wire Harness Is In Position
      GTY139458Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Install the clock assembly.
      Fig 5: Identifying Clock Assembly
      GTY151315Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  19. ADJUST CLOCK 
scientia non olet · About LEMON Manuals