DTC Check / Clear
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC
- Connect the Techstream to the DLC3.
- Turn the ignition switch ON and turn the Techstream ON.
- Select the following menu items: Body Electrical / Immpobiliser / Trouble Codes.
- Check DTCs and then write them down.
HINT:
Refer to the Techstream operator's manual for further details.
- Confirm the details of the DTCs (see DTC CHECK / CLEAR ).
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the ignition switch ON (do not start the engine) and turn the Techstream ON.
- Select the following menu items: Body Electrical / immobilizer / Trouble Codes.
- Erase DTCs.