LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Engine Control System (2UZ-FE)) >> Mass Air Flow Meter >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Mass Air Flow Meter: Installation

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL MASS AIR FLOW METER 
    1. Install the MAF meter with the 2 screws.
    2. Connect the MAF meter connector.
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  3. PERFORM  INITIALIZATION 
    1. Perform INITIALIZATION (see ).
    NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
    Fig 1: Locating Screws And MAF Meter
    G05196901Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals