LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 188 (Engine Control System (2GR-FE)) >> Mass Air Flow Meter >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Mass Air Flow Meter: Installation

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL MASS AIR FLOW METER 
    1. Install the mass air flow meter with the 2 screws.
      NOTE: Make sure that the O-ring is not cracked or jammed when installing it.
    2. Connect the mass air flow meter connector.
  2. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL 
    Fig 1: Locating Mass Air Flow Meter Screws
    G05184252Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals