LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 188 (Engine Control System (2GR-FE)) >> ECM >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Section 188 (Engine Control System (2GR-FE)): ECM: Removal

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE AIR CLEANER CAP  (see REMOVAL )
  3. REMOVE AIR CLEANER CASE  (see REMOVAL )
  4. REMOVE ECM 
    1. Remove the 3 bolts of the ECM bracket.
      Fig 1: Locating ECM Bracket Bolts
      G05183863Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 2 ECM connectors.
      NOTE: After disconnecting the connector, make sure that dirt, water and other foreign matter does not contact the connecting part of the connector.
      1. Raise the 2 levers while pushing the locks on the 2 levers, and disconnect the 2 ECM connectors.
    3. Remove the ECM with bracket.
      Fig 2: Locating ECM Connectors
      G05183864Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the 4 screws and 2 ECM brackets.
    Fig 3: Locating ECM Brackets And Screws
    G05183865Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals