Data List / Active Test
WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- READ DATA LIST
HINT:
Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
- Connect the intelligent tester (with CAN VIM) to the DLC3.
- Turn the ignition switch ON.
- Select the following menu items: DIAGNOSIS / OBD/MOBD / MAIN BODY / DATA LIST.
- Check the results by referring to the table below.
Main body ECU:
MAIN BODY ECU DATA LIST REFERENCETester Display Measurement Item/Range Normal Condition Diagnostic Note D DOR CTY SW Driver side door courtesy light switch signal / ON or OFF ON: Driver side door is open
OFF: Driver side door is closed- D LOCK POS SW Driver side door lock position switch signal / ON or OFF ON: Driver side door is unlocked
OFF: Driver side door is locked- D/L SW-LOCK Door manual lock switch signal / ON or OFF ON: Door control switch (for front driver door side) is turned to lock position
OFF: Door control switch (for front driver door side) is turned to unlock position- D/L SW-UNLOCK Door manual unlock switch signal / ON or OFF ON: Door control switch (for front driver door side) is turned to unlock position
OFF: Door control switch (for front driver door side) is turned to lock position- DOR KEY SW-LOCK Door key linked lock switch signal / ON or OFF ON: Driver side door key cylinder is turned to lock position
OFF: Driver side door key cylinder is turned to unlock position- D DOR KEY SW-UL Driver side door key linked unlock switch signal / ON or OFF ON: Driver side door key cylinder is turned to unlock position
OFF: Driver side door key cylinder is turned to lock position- P DOR CTY SW Passenger side door courtesy light switch signal / ON or OFF ON: Passenger side door is open
OFF: Passenger side door is closed- P LOCK POS SW Passenger side door lock position switch signal / ON or OFF ON: Passenger side door is unlocked
ON: Passenger side door is locked- RR DOR CTY SW Rear door RH courtesy light switch signal / ON or OFF ON: Rear door RH is open
OFF: Rear door RH is closed- RL DOR CTY SW Rear door LH courtesy light switch signal / ON or OFF ON: Rear door LH is open
OFF: Rear door LH is closed- BK DOR CTY SW Back door courtesy light switch signal / ON or OFF ON: Back door is open
OFF: Back door is closed- KEY UNLK WRN SW Unlock warning switch / ON or OFF ON: Ignition key is inserted
OFF: Ignition key is not inserted-
- PERFORM ACTIVE TEST
HINT:
Performing the intelligent tester's ACTIVE TEST allows relays, VSV, actuators and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.
- Connect the intelligent tester (with CAN VIM) to the DLC3.
- Turn the ignition switch ON.
- Select the following menu items: DIAGNOSIS / OBD/MOBD / MAIN BODY / ACTIVE TEST.
- Perform the ACTIVE TEST by referring to the table below.
Main body ECU:
MAIN BODY ECU ACTIVE TEST REFERENCETester Display Test Part Control Range DOOR LOCK Operate door lock motor LOCK / UNLOCK - D DOOR UNLOCK Operate driver door lock motor unlock side ON / OFF - VEHICLE HORN Sounds vehicle horn ON / OFF - HAZARD Turns FLSH relay ON / OFF -