LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> RX 350 FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> Crankshaft Position Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crankshaft Position Sensor: Removal

  1. REMOVE GENERATOR ASSEMBLY 

    HINT:

    (See GENERATOR )

  2. REMOVE COMPRESSOR AND MAGNETIC CLUTCH 

    HINT:

    (See REMOVAL )

  3. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
    2. Remove the bolt, and then remove the crankshaft position sensor.
      Fig 1: Locating Crankshaft Position Sensor Bolt
      G04968644Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals