Commercial Service Tool

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

COMMERCIAL SERVICE TOOL SPECIFICATION

(Kent-Moore No.) Tool name		Description
(BT-3373-F) Belt tension gauge	Courtesy of NISSAN MOTOR CO., U.S.A.	Checking drive belt tension
Power tool	Courtesy of NISSAN MOTOR CO., U.S.A.	Loosening bolts and nuts
Spark plug wrench	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing and installing spark plug
Valve seat cutter set	Courtesy of NISSAN MOTOR CO., U.S.A.	Finishing valve seat dimensions
Piston ring expander	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing and installing piston ring
Valve guide drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing and installing valve guide Intake & Exhaust: 9.5 mm (0.374 in) dia. 5.5 mm (0.217 in) dia.
Valve guide reamer	Courtesy of NISSAN MOTOR CO., U.S.A.	Reaming valve guide 1 or hole for oversize valve guide 2 Intake & Exhaust: d1: 6.0 mm (0.236 in) dia. d2: 10.2 mm (0.402 in) dia.
(J-43897-18) (J-43897-12) Oxygen sensor thread cleaner	Courtesy of NISSAN MOTOR CO., U.S.A.	Reconditioning the exhaust system threads before installing a new oxygen sensor (Use with anti-seize lubricant shown below.) J-43897-18 (18 mm dia.) for zirconia oxygen sensor J-43897-12 (12 mm dia.) for titania oxygen sensor
Anti-seize lubricant (Permatex 133AR or equivalent meeting MIL specification MIL-A-907)	Courtesy of NISSAN MOTOR CO., U.S.A.	Lubricating oxygen sensor thread cleaning tool when reconditioning exhaust system threads
T55 Torx® Plus Bit	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing and installing M/T flywheel bolts