LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460 >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (Transfer Case) >> Trouble Diagnosis >> Transfer Control Unit Input/Output Signal Reference Values >> Transfer Control Unit Inspection Table >> Specifications between transfer control unit terminals
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Specifications between transfer control unit terminals

WARNING: This page is about a different car, the 2005 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Transfer Control Unit Terminal Connector Layout
G03602718Courtesy of NISSAN MOTOR CO., U.S.A.
NOTE: Data are reference value and are measured between each terminal and ground.
TRANSFER CONTROL UNIT TERMINAL SPECIFICATIONS

Terminal Wire color Item Condition Data (Approx.)
1 L CAN-H - -
2 P CAN-L - -
3 L K-LINE (CONSULT-II signal) - -
6 B Ground Always 0V
10 LG/B Actuator position switch 1 4WD shift switch: 2WD and 4LO 0V
4WD shift switch: 4H Battery voltage
11 W/L Actuator position switch 2 4WD shift switch: 4LO 0V
4WD shift switch: 2WD and 4H Battery voltage
12 BR Actuator position switch 3 4WD shift switch: 2WD and 4H 0V
4WD shift switch: 4LO Battery voltage
13 BR/W Actuator position switch 4 4WD shift switch: 4H and 4LO 0V
4WD shift switch: 2WD Battery voltage
14 G/W 4WD shift switch (2WD) Ignition switch: ON 4WD shift switch: 2WD Battery voltage
4WD shift switch: 4H and 4LO 0V
15 O 4WD shift switch (4H) 4WD shift switch: 4H Battery voltage
4WD shift switch: 2WD and 4LO 0V
16 R 4WD shift switch (4LO) 4WD shift switch: 4LO Battery voltage
4WD shift switch: 2WD and 4H 0V
17 G/Y Wait detection switch
  • Vehicle stopped
  • Engine running
  • A/T selector lever "N" position
  • Brake pedal depressed
 4WD shift switch: 4H and 4LO 0V
4WD shift switch: 2WD Battery voltage
18 B Ground Always 0V
19 W Power supply (Memory back-up) Ignition switch: ON Battery voltage
Ignition switch: OFF Battery voltage
23 R/B ATP switch
  • Vehicle stopped
  • Engine running
  • A/T selector lever "P" position
  • Brake pedal depressed
 4WD shift switch: 4H to 4LO or 4LO to 4H (While actuator motor is operating.) 0V
Except the above Battery voltage
24 V 4LO switch
  • Vehicle stopped
  • Engine running
  • A/T selector lever "N" position
  • Brake pedal depressed
 4WD shift switch: 4LO 0V
Except the above Battery voltage
25 L/W Ignition switch monitor Ignition switch: ON Battery voltage
Ignition switch: OFF 0V
27 Y/R Actuator motor power supply Ignition switch: ON Battery voltage
Ignition switch: OFF 0V
28 Y/L Actuator motor (+) 4WD shift switch: 2WD to 4H or 4H to 4LO or 2WD to 4LO Battery voltage
Except the above 0V
31 G/B Actuator motor (-) 4WD shift switch: 4LO to 4H or 4H to 2WD or 4LO to 2WD Battery voltage
Except the above 0V
32 B Actuator motor ground Always 0V
35 B/W 4WD shift indicator lamp (Rear indicator) Engine running Rear indicator of 4WD shift indicator lamp: ON 0V
Rear indicator of 4WD shift indicator lamp: OFF Battery voltage
36 L 4WD shift indicator lamp (Front and center indicator) Front and center indicator of 4WD shift indicator lamp: ON 0V
Front and center indicator of 4WD shift indicator lamp: OFF Battery voltage
37 W/G 4LO indicator lamp 4LO indicator lamp: ON 0V
4LO indicator lamp: OFF Battery voltage
38 W/B 4WD warning lamp 4WD warning lamp: ON 0V
4WD warning lamp: OFF Battery voltage
39 L/B ATP warning lamp
  • Vehicle stopped
  • Engine running
  • A/T selector lever "P" position
  • Brake pedal depressed
 4WD shift switch: 4H to 4LO or 4LO to 4H (While actuator motor is operating.) Battery voltage
Except the above 0V
40 Y Transfer relay 2 ignition switch ON 0V
ignition switch OFF Battery voltage
44 Y/R Power supply Ignition switch: ON Battery voltage
Ignition switch: OFF 0V
45 Y/R Power supply Ignition switch: ON Battery voltage
Ignition switch: OFF 0V
CAUTION: When using a circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.
scientia non olet · About LEMON Manuals