October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Steering Pad Switch: Installation
- INSTALL STEERING PAD SWITCH ASSEMBLY
- Install the switch with the 4 screws.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Connect the connector.
- INSTALL STEERING PAD
(See
INSTALLATION
)
- INSTALL SWITCH AND VOLUME CASE
(See
INSTALLATION
)
- INSTALL NO. 2 STEERING WHEEL COVER LOWER
(See
INSTALLATION
)
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- INSTALL COWL TOP VENTILATOR LOUVER RH
(See
INSTALLATION
)
- INSPECT STEERING PAD
(See
ON-VEHICLE INSPECTION
)
- PERFORM INITIALIZATION
- Perform initialization (see
INITIALIZATION
).
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- CHECK SRS WARNING LIGHT
- Check the SRS warning light (see
DIAGNOSIS SYSTEM
).