October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Fail-Safe Chart
HINT:
If the following conditions are detected while the cruise control is in operation, the system clears the stored vehicle speed in the ECM and cancels the cruise control operation.
FAIL-SAFE CHART
| Vehicle Condition |
Auto Cancel Condition |
Re-operation Condition |
| CRUISE main indicator light blinks |
- There is open or short in stop light switch circuit
- There is problem with vehicle speed signal
- There is problem with throttle position sensor and motor
|
Turn cruise control switch ON again |
| CRUISE main indicator light blinks |
- There is problem with input circuit of stop light switch circuit
- There is problem with cancel circuit
|
- Turn cruise control switch ON again
- Turn engine switch off
|
| CRUISE main indicator light turns off |
- Vehicle speed is lower than low speed limit (approx. 40 km/h (25 mph)) while running with cruise control system on
- Vehicle speed is lower than stored speed by approx. 16 km/h (9.9 mph) or more
|
Pushing cruise control switch to RES/ACC |