LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> IS 350 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Park / Neutral Position Switch >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Park / Neutral Position Switch: Removal

  1. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY (See  REMOVAL   ) 
  2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY 
    1. Disconnect the park/neutral position switch connector.
      Fig 1: Identifying Park/Neutral Position Switch Connector
      G05316964Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the nut and transmission control shaft lever RH.
      Fig 2: Identifying Transmission Control Shaft Lever RH
      G05316965Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Using a screwdriver, pry out the lock washer.
      Fig 3: Identifying Tabs Of Lock Washer
      G05316966Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the lock nut and lock washer.
      Fig 4: Identifying Lock Washer And Nut
      G05316967Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the bolt and park/neutral position switch.
      Fig 5: Identifying Park/Neutral Position Switch Bolt
      G05316968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals