Service Data
2GR-FSE STARTING - SERVICE DATA
| Starter assembly | Rated voltage and output power | 12 V 1.7 kW | |
| Specified current | 90 A or less at 11.5 V | ||
| Starter armature assembly | Standard length | 3.1 mm (0.122 in.) | |
| Maximum length | 3.8 mm (0.150 in.) | ||
| Brush length | Standard length | 9.0 mm (0.354 in.) | |
| Minimum length | 4.0 mm (0.158 in.) | ||
| Starter relay | Specified condition | 1 - 2 | Below 1 Ω |
| 3 - 5 | 10 kΩ or higher | ||
| Starter cut relay | Specified condition | 1 - 2 | Below 1 Ω |
| 3 - 5 | 10 kΩ or higher | ||
| Engine switch | Resistance | Pushed: 7 (SS1) - 5 (GND) | Below 1 Ω |
| Pushed: 2 (SS2) - 5 (GND) | |||
| Not pushed: 7 (SS1) - 5 (GND) | 10 kΩ or higher | ||
| Not pushed: 2 (SS2) - 5 (GND) | |||