LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transaxle - A960E) >> Transmission Control Switch >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Transmission Control Switch: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT TRANSMISSION CONTROL SWITCH 
    1. Connect the park/neutral position switch connector.
    2. Disconnect the transmission control switch connector of the shift lock control unit assembly.
    3. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      STANDARD RESISTANCE SPECIFICATIONS

      Shift Position Tester Connection Specified Condition
      S, "+" and "-" 3 - 7 Below 1 Ω
      Except S, "+" and "-" 3 - 7 10 kΩ or higher
      Fig 1: Identifying Terminals Of Transmission Control Switch Connector
      G04976052Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the resistance value is not as specified, replace the transmission control switch.

scientia non olet · About LEMON Manuals