Typical Malfunction Thresholds
Functional check:
TYPICAL MALFUNCTION THRESHOLDS
| Either of following conditions 1 or 2 is met: | - |
| 1. Frequency that following conditions (a) and (b) are met: | 5 time or more |
| (a) Engine RPM - target engine RPM | Below -100 rpm, or more than 200 rpm |
| (b) Vehicle condition | Stop after vehicle was driven by 6.25 mph (10 km/h) or more |
| 2. Frequency that following conditions (a) and (b) are met: | Once |
| (a) Engine RPM - target engine RPM | Below -100 rpm, or 200 rpm or more |
| (b) ISC flow rate learning value | 1.22 L/sec. or less, or 7.8 L/sec. or more |