Crankshaft Position Sensor: Service and Repair

REMOVAL

1. REMOVE ENGINE UNDER COVER ASSEMBLY REAR




2. REMOVE CRANKSHAFT POSITION SENSOR
a. Disconnect the crank position sensor connector.
b. Remove the bolt and crankshaft position sensor.

INSTALLATION




1. INSTALL CRANKSHAFT POSITION SENSOR
a. Install crank position sensor with bolt.

Torque: 6.5 N.m (65 kgf.cm, 58 in.lbf)

b. Reconnect the crank position sensor connector.

2. INSTALL ENGINE UNDER COVER ASSEMBLY REAR