BLUETOOTH Tel Check Mode

HINT:

Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle.

1. ENTER DIAGNOSTIC MODE  (See DTC CHECK / CLEAR )
2. "BLUETOOTH" TEL CHECK 
   1. Select "'Bluetooth' TEL Check" from the "Diagnosis MENU" screen.
      Fig 1: Diagnosis MENU Screen Display - Bluetooth TEL Check

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. "BLUETOOTH" CHECK 
   1. Select "'Bluetooth' Check" from the "'Bluetooth' Handsfree Check Menu" screen.
      Fig 2: Diagnosis MENU Screen Display - Bluetooth Handsfree Check

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Select "Serial Communication Log" from the '"Bluetooth' Check Menu" screen.
      Fig 3: Diagnosis MENU Screen Display - Serial Communication Log

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. The communication log data in the display ECU are displayed on this screen.

         HINT:

         The displayed data can be used as a reference.

      Fig 4: Diagnosis MENU Screen Display - Serial Communication Log Data

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Select "Software Version" from the '"Bluetooth' Check Menu" screen.
      Fig 5: Diagnosis MENU Screen Display - Software Version

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Check the software version of the "Bluetooth" module.
      Fig 6: Diagnosis MENU Screen Display - Bluetooth Module

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      SOFTWARE VERSION SCREEN DESCRIPTION
      
      

      Display	Contents
      General Version/*1	General software version of "Bluetooth" module If any of the API version, upper stack version, and low stack version is updated, the general version Is upgraded.
      API Version/*2	API software version is displayed.
      Upper Stack Version/*3	Upper Stack version is displayed.
      Lower Stack Version/*4	Lower Stack version is displayed.

      HINT:

      This function is controlled by the built-in display ECU.

4. HANDSFREE VOICE QUALITY SET 
   1. Select "Handsfree Voice Quality Set" from the "'Bluetooth' Handsfree Check Menu" screen.
      Fig 7: Diagnosis MENU Screen Display - Bluetooth Handsfree Check Menu

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Check the handsfree voice level.
      Fig 8: Diagnosis MENU Screen Display - Checking Handsfree Voice Level

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   SCREEN DESCRIPTION 

   SCREEN DESCRIPTION
   
   

   Display	Contents
   Received voice level adjustment/*1	Setting possible for the voice level received from "Bluetooth" compatible phones.
   Sent voice level adjustments	Setting possible for the voice level sent to "Bluetooth" compatible phones.

   HINT:

   This function is controlled by the built-in display ECU.

   NOTE: "Voice Quality Type" should not be changed.