Inspection Procedure
- PERFORM ACTIVE TEST (CRUISE INDICATOR LAMP)
- Select the ACTIVE TEST, use the hand-held tester to generate a control command, and then check that the cruise indicator lamp illuminates.
Combination meter assy:
OK: Indicator lamp illuminates/turns off.
COMBINATION METER ASSY ACTIVE TESTItem Test Detail Diagnostic Note CRUISE INDIC Cruise indicator lamp/ON or OFF Confirm that vehicle is stopped and engine is idling
- NG: Go to COMBINATION METER SYSTEM (See PRECAUTION )
- OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )
- Select the ACTIVE TEST, use the hand-held tester to generate a control command, and then check that the cruise indicator lamp illuminates.