LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> SC 430 >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System >> Camshaft Timing Oil Control Valve ASSY LH >> Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Camshaft Timing Oil Control Valve ASSY LH: Replacement

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE V-BANK COVER 
    1. Remove the 2 nuts and V-bank cover.
  3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSY 
    1. Disconnect the oil control valve connector.
    2. Remove the bolt, oil control valve and O-ring.
  4. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSY 
    1. Install a new O-ring to the oil control valve.
    2. Install the oil control valve with the bolt.

      Torque: 8.5 N.m (87 kgf.cm, 75 in.lbf) 

    3. Connect the oil control valve connector.
  5. INSTALL V-BANK COVER 
    1. Install the V-bank cover with the 2 nuts.

      Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf) 

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  7. PERFORM INITIALIZATION (See  INITIALIZATION  ) 
    NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals