July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Door Control Switch: Inspection

INSPECT DOOR CONTROL SWITCH

Remove the door control switch assembly.
Measure the resistance according to the value(s) in the table below.

Standard resistance

STANDARD RESISTANCE SPECIFICATION

Tester connection	Condition	Specified condition
2 - 3	Lock	Below 1 Ω
2 - 3 1 - 2	OFF (Free)	10 kΩ or higher
1 - 2	Unlock	Below 1 Ω

Fig 1: Identifying Door Control Switch Assembly

G04049934

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002