DTC C1249/49 Open in Stop Light Switch Circuit: Description

WARNING: This page is about a different car, the 2006 Lexus GS 430 and 2006 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.

The skid control ECU (housed in the actuator assembly) inputs the stop light switch signal and the condition of brake operation.

The skid control ECU has an open detection circuit, which outputs this DTC when detecting an open in the stop light input line while the stop light switch is OFF.

DTC DETECTION CONDITION

DTC No.	DTC Detecting Condition	Trouble Area
C1249/49	When IG1 terminal voltage is 9.5 to 17.2 V, an open circuit of the stop light switch continues for 0.3 sec. or more. When the brake pedal load sensing switch is ON, the master cylinder pressure is 2 Mpa or more and the deceleration calculated from the vehicle speed is 0.2 G or more, the stop light switch is OFF for 2 sec. or more.	Stop light switch Stop light switch circuit ABS and TRACTION actuator assembly