LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2005 >> SC 430 >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> SFI System - Diagnostics >> How To Proceed With Troubleshooting
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

How To Proceed With Troubleshooting

  1. VEHICLE BROUGHT TO WORKSHOP 
    1. NEXT: Go to next step. 
  2. CUSTOMER PROBLEM ANALYSIS (See  CUSTOMER PROBLEM ANALYSIS CHECK   ) 
    1. NEXT: Go to next step. 
  3. CONNECT OBD HAND-HELD TESTER TO DLC3 

    HINT:

    If the display indicates a communication fault in the tool, inspect the DLC3.

    1. NEXT: Go to next step. 
  4. CHECK DTC AND FREEZE FRAME DATA (See  DTC CHECK/CLEAR   ) 

    HINT:

    Record or print DTC and freeze frame data, if needed.

    1. NEXT: Go to next step. 
  5. CLEAR DTC AND FREEZE FRAME DATA (See  DTC CHECK/CLEAR   ) 
    1. NEXT: Go to next step. 
  6. VISUAL INSPECTION 
    1. NEXT: Go to next step. 
  7. SETTING CHECK (TEST) MODE DIAGNOSIS (See  CHECK MODE PROCEDURE   ) 
    1. NEXT: Go to next step. 
  8. PROBLEM SYMPTOM CONFIRMATION 

    HINT:

    If the engine does not start, perform steps  10 and  12 first.

    Result: 

    PROBLEM SYMPTOM CONFIRMATION

    Result Proceed to
    Malfunction does not occur A
    Malfunction occurs B
    1. B: Go to step   10 . 
    2. A: Go to next step. 
  9. SYMPTOM SIMULATION 
    1. NEXT: Go to next step. 
  10. DTC CHECK (See  DTC CHECK/CLEAR   ) 

    Result: 

    RESULT DESCRIPTION

    Result Proceed to
    Malfunctioning code A
    No code B
    1. B: Go to step   12 . 
    2. A: Go to next step. 
  11. See  DIAGNOSTIC TROUBLE CODE TABLE  
    1. NEXT: Go to step   14 . 
  12. See  BASIC INSPECTION  

    Result: 

    RESULT DESCRIPTION

    Result Proceed to
    Malfunctioning parts not confirmed A
    Malfunctioning parts confirmed B
    1. B: Go to step   17 . 
    2. A: Go to next step. 
  13. See  PROBLEM SYMPTOMS TABLE  

    Result: 

    RESULT DESCRIPTION

    Result Proceed to
    Malfunctioning circuit confirmed A
    Malfunctioning parts confirmed B
    1. B: Go to step   17 . 
    2. A: Go to next step. 
  14. CHECK ECM POWER SOURCE CIRCUIT (See  ECM POWER SOURCE CIRCUIT   ) 
    1. NEXT: Go to next step. 
  15. CIRCUIT INSPECTION 

    Result: 

    RESULT DESCRIPTION

    Result Proceed to
    Malfunction not confirmed A
    Malfunction confirmed B
    1. B: Go to step   18 . 
    2. A: Go to next step. 
  16. See  CHECK FOR INTERMITTENT PROBLEMS  
    1. NEXT: Go to step   18 . 
  17. PARTS INSPECTION 
    1. NEXT: Go to next step. 
  18. IDENTIFICATION OF PROBLEM 
    1. NEXT: Go to next step. 
  19. ADJUSTMENT, REPAIR 
    1. NEXT: Go to next step. 
  20. CONFIRMATION TEST 
    1. NEXT: END 
scientia non olet · About LEMON Manuals