July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!
Park/Neutral Position Switch
Check that engine can only be started with shift lever in the "N" or "P" positions, not in any other. If so, proceed to adjust Park/Neutral Position (PNP) switch.
Adjust PNP switch using the following steps:
Loosen bolt of PNP switch and set shift lever to "N" position.
Align the groove and neutral basic line. See Fig 1.
Hold switch in position and tighten 2 bolts to 10 ft. lbs. (13 N.m).
After adjustment, perform inspection as described in step 1.
Fig 1: Aligning PNP Switch Groove To Neutral Basic Line