Torque Specification
TORQUE SPECIFICATION
| Part tightened | N.m | kgf.cm | ft.lbf | |
|---|---|---|---|---|
| Bearing retainer x Drive end frame | 3.0 | 31 | 27 in.lbf | |
| Rectifier end frame x Drive end frame | 4.5 | 46 | 40 in.lbf | |
| Cord clip x Rectifier end frame | 5.4 | 55 | 48 in.lbf | |
| Generator pulley x Rotor | 110.5 | 1, 125 | 81 | |
| Rectifier holder x Coil lead on rectifier end frame | L3B type | 2.9 | 30 | 26 in.lbf |
| Voltage regulator and brush holder x Rrectifier end frame | L3B type | 2.0 | 20 | 18 in.lbf |
| Brush holder x Rectifier end frame | SC1 type | 2.0 | 20 | 18 in.lbf |
| Plate terminal x Rectifier holder (L3B type) | Nut | 4.4 | 45 | 39 in.lbf |
| Screw | 3.9 | 39 | 35 in.lbf | |
| Rear end cover x Rectifier holder | L3B type | 4.4 | 45 | 39 in.lbf |
| SC1 type | 4.6 | 47 | 41 in.lbf | |
| Terminal insulator x Rectifier holder | 4.1 | 42 | 36 in.lbf | |
| Generator x Generator bracket | 56 | 570 | 41 | |
| Generator x Adjusting bar | 18 | 180 | 13 | |