w/ Driving Position Memory System: POWER MIRROR CONTROL SYSTEM
This system uses the multiplex communication system, so check diagnosis system of the multiplex communication system before you proceed with troubleshooting. Refer to MULTIPLEX COMMUNICATION SYSTEM .
POWER MIRROR CONTROL SYSTEM (W/ DRIVING POSITION MEMORY SYSTEM) PROBLEM SYMPTOM
| Symptom | Suspect Area | Action |
|---|---|---|
| Both right and left mirrors do not operate. | 1. Mirror Switch | INSPECTION |
| 2. Wire Harness | - | |
| 3. Body No. 2 ECU | BODY ECU NO. 2 SYSTEM OPERATION CHECK | |
| Only one side of mirror does not operate. | 1. Mirror Motor | INSPECTION |
| 2. Wire Harness | - | |
| 3. Driver and Passenger Door ECU | DRIVER DOOR CONTROL SYSTEM (DIAGNOSTICS) | |
| PASSENGER DOOR CONTROL SYSTEM (DIAGNOSTICS) | ||
| The mirror does not return to the memorized position. | 1. Mirror Position Sensor | - |
| (Position is not set) | INSPECTION | |
| 2. Wire Harness | - | |
| 3. Power Seat Control ECU | POWER SEAT CONTROL SYSTEM | |
| The memorized position is moved. | 1. Mirror Position Sensor | |
| (Position is not set) | INSPECTION | |
| 2. Wire Harness | - |