LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2001 >> LS 430 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Driver Side Junction Block (Body No. 2 Control System) >> Circuit Inspection >> Combination Meter Circuit >> Inspection Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection Procedure

  1. Check the combination meter. 
    1. NG : Replace the combination meter. 
    2. OK : Go to next step. 
  2. Check wire harness and connector between combination meter and driver side J/B ECU. 
    1. NG : Repair or replace wire harness or connector. 
    2. OK : Proceed to next circuit inspection shown on problem symptom table, see  PROBLEM SYMPTOMS TABLE  .