Down Operation Inoperative
NOTE:
This test diagnoses inoperative down operation (jam function) when foreign object restricts window up operation.
- Ensure all power window modes function normally (i.e. UP, DOWN, AUTO UP/DOWN, multi-remote, door key switch and key OFF). If all modes function normally, go to next step. If all modes do not function normally, perform appropriate symptom test.
- Restrict window movement as window is operated upward. Window should switch to down operation. If point of resistance is such that window opening is greater than 7.874" (200 mm), window will automatically lower 1.969" (50 mm) and stop. If point of resistance is such that window opening is 7.874" (200 mm) or less, window will automatically lower until opening is 7.874" (200 mm) and stop. If operation is as specified, system is okay at this time. If operation is not as specified, replace power window motor.