Driver's Power Seat Switch Test
Disconnect power seat switch connector. Check for continuity between specified terminals of switch connector, with switch in specified position. See DRIVER'S POWER SEAT SWITCH CONTINUITY TEST table. Continuity should exist between terminals being checked. Replace switch if necessary.
DRIVER'S POWER SEAT SWITCH CONTINUITY TEST
| Switch Position | (1) Terminals No. | |||
|---|---|---|---|---|
| Slide | ||||
| Forward | 12 & 13 | |||
| Backward | 11 & 13 | |||
| Front Up/Down | ||||
| Up | 10 & 13 | |||
| Down | 9 & 13 | |||
| Rear Up/Down | ||||
| Up | 6 & 13 | |||
| Down | 5 & 13 | |||
| Recline | ||||
| Forward | 3 & 13 | |||
| Rearward | 4 & 13 | |||
| Headrest | ||||
| Up | 13 & 16 | |||
| Down | 13 & 15 | |||
|
||||