No.1 Vehicle Speed Sensor

REPLACEMENT
1. Disconnect No.1 vehicle speed sensor connector.





2. Remove No.1 vehicle speed sensor assembly, as follows:
a. Remove the bolt and No.1 vehicle speed sensor assembly.
b. Remove the speedometer driven gear and O-ring from the No.1 vehicle speed sensor.
3. Install No.1 vehicle speed sensor assembly, as follows:
a. Coat a new O-ring with Automatic Transmission Fluid (ATF).
b. Install the O-ring and speedometer driven gear to the No.1 vehicle speed sensor.
c. Install the No.1 vehicle speed sensor to the extension housing and torque the bolt.
Torque: 16 Nm (12 ft. lbs.).
4. Connect No.1 vehicle speed sensor connector.