LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1995 >> LS 400 >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Self-Diagnostic System >> Clearing Codes
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Clearing Codes

  1. Disconnect short pin from Data Link Connector No. 1 (DLC1). See Figure. DLC1 is located in engine compartment, next to oil fill cap. Using a jumper wire, connect terminals Tc and E1 of Data Link Connector No. 1 (DLC1) or Data Link Connector No. 2 (DLC2). See Figure. DLC2 is located under left side of instrument panel, near kick panel.
  2. Turn ignition on. With vehicle stopped, depress brake pedal 8 or more times in 3 seconds. Ensure ABS light blinks once every .25 second (normal code). Codes are now erased. Remove jumper wire. Connect short pin to DLC1. Ensure ABS light goes out after 3 seconds.
NOTE: ECU-B fuse removal will clear DTC's, but other memory systems will also be cleared.
scientia non olet · About LEMON Manuals