October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Rear Switches
- Remove rear window switch to be tested. Connect a jumper wire between positive battery terminal and terminal No. 1 of switch. See Fig 1. Connect another jumper wire between negative battery terminal and terminal No. 4 of switch.
- Check for continuity between specified terminals of switch. See REAR SWITCH CONTINUITY TEST TABLE . If continuity is not as specified, replace window switch.
REAR SWITCH CONTINUITY TEST
| Position |
Terminals No. |
| Off (Neutral) |
|
| Up |
3 & 4 |
| Down |
2 & 4 |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002