LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1994 >> ES 300 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Fuel System >> Fuel Cut System Operation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Cut System Operation

  1. On ES300, remove "V" bank cover from top of engine. Start and warm engine to operating temperature. Turn A/C off. Use a stethoscope to listen for injector operating noise (or feel for vibration with finger).
  2. Increase engine speed to at least the following specification. See CONNECTING TACHOMETER under INTRODUCTION .
    • 3500 RPM
  3. Release throttle lever. When throttle lever is released, injectors should stop operating until engine speed decreases to 1200 RPM.
scientia non olet · About LEMON Manuals