LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1993 >> GS 300 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Cold Start Injector >> Removal (ES300)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal (ES300)

Disconnect negative battery cable. Disconnect cold start injector connector. Using shop towels to absorb spilled fuel, loosen injector pipe union bolt slowly. Remove injector pipe union bolt and 2 gaskets. Remove 2 nuts, cold start injector and gasket.

scientia non olet · About LEMON Manuals