LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1992 >> ES 300 Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Cold Start Injector (Es300) >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cold Start Injector (Es300): Installation

  1. Install injector with a new gasket, and tighten to specification. See TORQUE SPECIFICATIONS  table.
  2. Using 2 new gaskets, connect injector pipe with union bolt and tighten to specification. See TORQUE SPECIFICATIONS  table. Connect cold start injector connector. Connect cable to negative battery terminal. Check for fuel leaks.
scientia non olet · About LEMON Manuals