LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2013 >> Range Rover Base >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Cruise Control Systems >> Instrument Cluster Software Update (LTB00583NAS1)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Instrument Cluster Software Update (LTB00583NAS1)

Publication date: 2013-09-19
Reference number: LTB00583NAS1

INSTRUMENT CLUSTER SOFTWARE UPDATE

INSTRUMENT CLUSTER SOFTWARE UPDATE

TECHNICAL SERVICE BULLETIN

Reference Number(s): LTB00583NAS1, Date of Issue:  August 19, 2013
LAND ROVER: 2013 Range Rover (LG)
SECTION: 413-01
AFFECTED VEHICLES: Range Rover (LG) Model Year: 2013 VIN: DA000083-DA124981

MARKETS

NAS

CONDITION SUMMARY

Situation:  One or more of the following issues may be evident:

  1. No Instrument Cluster (IC) display when the ignition is switched 'ON'; IC display returns after a period of 5 seconds;
  2. Infotainment source selection when playing files via the USB port causes IC display to continuously reset;
  3. CD information displayed in the IC does not match the Touch Screen (TS) display;
  4. Auto Speed Limiter warning contains inaccurate French translations.

Cause:  These issues may be caused by:

  1. Software handling of HMI inputs;
  2. Characters sent from Infotainment to be displayed on the IC are not in the IC character set and not handled robustly;
  3. Incorrect input signals defined by the Infotainment system owner to be used by the IC;
  4. Master IC translations list incorrect.

Action:  Should a customer express any of these concerns, follow the Service Instruction outlined below.

PARTS

No Parts Required

TOOLS

NOTE: This document is an 'Active Bulletin' that will display a functional programming shortcut if accessed within a diagnostic session using SDD.

IDS with latest IDS-DVD and Calibration File; first available on DVD134.05 v.137

Jaguar Land Rover-approved Midtronics battery power supply

WARRANTY

NOTE: Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to TOPIx to obtain the latest repair time.
NOTE: DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
DESCRIPTION SRO TIME (HOURS) CONDITION CODE CAUSAL PART
Instrument cluster - system diagnosis - includes configuration of new ECU 88.90.03  0.7 42 LR033681
NOTE: Normal Warranty policies and procedures apply.

SERVICE INSTRUCTION

CAUTION: A Jaguar Land Rover-approved Midtronics battery power supply must be connected to the vehicle battery during IDS / SDD diagnosis / module programming.
NOTE: IDS must be loaded with DVD134.05 v.137 or later.
  1. Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle battery.
  2. Turn ignition 'ON' (engine not running).
  3. Connect the Integrated Diagnostic System (IDS) to the vehicle and begin a new Symptom Driven Diagnostics (SDD) session.
  4. Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle and initiating the data collect sequence.
  5. Select 'Diagnosis' from the Session Type screen.
  6. Select the 'Selected Symptoms' tab, and then select the following:
    • Electrical > Instruments > Information and message centre
  7. Select 'continue'.
  8. Select the 'Recommendations' tab, and then select 'Run  ' to perform the 'Configure existing module - Instrument cluster control module' option.
  9. Follow all on-screen instructions to complete this task.
  10. Exit the current session.
  11. Disconnect the IDS and the battery power supply from the vehicle.
scientia non olet · About LEMON Manuals