LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine System - General Information) >> Engine System - General Information >> General Procedures >> Piston Pin To Bore Diameter
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Piston Pin To Bore Diameter

WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The piston and piston pin form a matched pair. Do not mix up the components.
  1. Measure the diameter of the piston pin bore.
    • Measure the diameter in two directions.
    • If the values are not to specification, install both a new piston and a new piston pin.
    GJ0002935
scientia non olet · About LEMON Manuals