LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Climate Control System - General Information -- XF/X260) >> Climate Control System - General Information >> Inspection And Assembly Requirements >> General Procedures
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

General Procedures

WARNING: This page is about a different car, the 2018 Jaguar XF, 2017 Jaguar XF, and 2016 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for leaks using ultraviolet (UV) Lamp.

    For additional information, refer to Flourescent Dye Leak Detection in this section: FLUORESCENT DYE LEAK DETECTION .

  2. NOTE:
    • Any time a hose or component connection leak is observed, the component and fitting must be separated, cleaned and a new O-ring fitted and lubricated with air conditioning compressor oil. For additional information, refer to Specifications in this section: SPECIFICATIONS .
    • When separating A/C joints, cap the open connections immediately. Do not leave open to atmosphere.

    O-ring seal surfaces must be free of dirt, lint, burrs and scratches. The O-ring and connector should be lubricated with air conditioning compressor oil.

    For additional information, refer to Specifications in this section: SPECIFICATIONS .