LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Exterior Lighting) >> Exterior Lighting >> General Procedures >> Headlamp Adjustment
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Headlamp Adjustment

WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: With self leveling suspension, make sure the vehicle is at the standard ride height.
NOTE: The headlamp setting is 1.2 % below horizontal and parallel.
NOTE: NAS vehicles have vertical adjustment only.
  1. Align the headlamp beam setting equipment to one headlamp.
  2. Switch the headlamps on and to dipped beam.
    3. NOTE: NAS vehicles have vertical adjustment only.
  3. Adjust the headlamps with a Phillips screwdriver.
    • Rotate the adjusters A and B by an equal amount for vertical alignment.
    • Rotate the adjusters A or B for horizontal alignment.
    GJ0019124
  4. To adjust the second headlamp, repeat the above procedure.
scientia non olet · About LEMON Manuals