Torque Specifications

Torque Specifications

Oil Drain Plug 28 Nm (21 ft. lbs.)
Oil Filler Plug 34 Nm (25 ft. lbs.)
Oil Temperature Sensor 22 Nm (16 ft. lbs.)
Differential Locking Motor++ 10 Nm (7 ft. lbs.)
Differential Front Mounting Bolts 100 Nm (74 ft. lbs.)
Differential Rear Mounting Bolt:
Stage 1 120 Nm (89 ft. lbs.)
Stage 2 Tighten a further 180°
Driveshaft to Rear Axle Drive Flange Bolts*
Stage 1 44 Nm (33 ft. lbs.)
Stage 2 Tighten a further 45°

* New Panchlock Torx bolts must be installed
** New Nuts must be installed
+ Stake nut upon completion of operation
++ Apply sealant, Part No. STC 50550 to flange of locking motor