Pinpoint Test T: Route Calculations Cannot Be Performed
- T1: ROUTE CALCULATIONS CANNOT BE PERFORMED
- Check to see if route calculations are possible when the current location is correct and a different destination is set.
Are route calculations possible?
- Yes : GO to T 2.
- No : Check the condition of the map disc (scratches, contamination, deformation, cracks, non-genuine disc etc.).
- T2: ROUTE CALCULATIONS CANNOT BE PERFORMED
- Check to see if a point of interest search can be performed.
Can a point of interest search can be performed?
- Yes : GO to T 3.
- No : Check the condition of the map disc (scratches, contamination, deformation, cracks, non-genuine disc etc.).
- T3: ROUTE CALCULATIONS CANNOT BE PERFORMED
- Check to see if the map screen can be touch scrolled.
Can the map screen be touched scrolled?
- Yes : Check the condition of the map disc (scratches, contamination, deformation, cracks etc.). If no fault is evident, suspect the navigation module. Refer to the new module/component installation note at the top of this section.
- No : Check the condition of the map disc (scratches, contamination, deformation, cracks, non-genuine disc etc.).