Mechanical Specifications

Torque Specifications

Camshaft Position (CMP) Sensor Bolt* 10 Nm (7 ft. lbs.)
Catalyst Monitor Sensor 45 Nm (33 ft. lbs.)
Cataylst Monitor Sensor Harness Bolts 6 Nm (5 ft. lbs.)
Crankshaft Position (CKP) Sensor Torx Bolts 10 Nm (7 ft. lbs.)
Engine Control Module (ECM) Bracket Bolts 6 Nm (4 ft. lbs.)
Flywheel Sensor Bolt 10 Nm (7 ft. lbs.)
Flywheel Sensor Bracket Screws 10 Nm (7 ft. lbs.)
Fuel Rail Pressure Sensor 6 Nm (5 ft. lbs.)
Heated Oxygen Sensor (HO2S)** 45 Nm (33 ft. lbs.)
Knock Sensor Retaining Bolt 20 Nm (14 ft. lbs.)
Mass Air Flow (MAF) Sensor Torx Screws 2 Nm (1 ft. lbs.)
*Apply CLEAN engine oil to a new CMP Sensor O-ring
**Apply anti-seize lubricant to threads of sensor