LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2005 >> Freelander SE3 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Management System - Siemens >> 18.30.28 Sensor - knock (KS) >> Refit
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

18.30.28 Sensor - knock (KS): Refit

  1. Clean KS and mating faces on cylinder block.
  2. Position KS, ensure that harnesses are correctly routed, fit and tighten bolts to 25 Nm (18 lbf.ft).
  3. Connect KS multiplug.
  4. Fit LH inlet manifold.

    Refer to REFIT .

  5. Connect battery earth lead.
  6. If a new KS has been fitted, reset ECM adaptions using T4.
scientia non olet · About LEMON Manuals