Modulator Unit - Abs: Remove

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Land Rover Discovery, 2003 Land Rover Discovery, 2002 Land Rover Discovery, 2001 Land Rover Discovery, and 2000 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.

Position cloth under modulator to absorb fluid spillage.
CAUTION: Brake fluid will damage paint finished surfaces. If spilled, immediately remove fluid and clean.
Disconnect 3 multiplugs from ABS modulator. See Fig 1.
Disconnect 2 inlet brake pipe unions from pump side of modulator.
CAUTION: Always fit plugs to open connections to prevent contamination.
Disconnect 4 outlet brake pipe unions from top of modulator. See Fig 1.
CAUTION: Always fit plugs to open connections to prevent contamination.
Loosen 3 nuts securing modulator to mounting bracket.
Release and remove modulator from mounting bracket.
Remove 3 mounting rubbers from modulator.

Fig 1: Removing/Installing ABS Modulator Unit

Courtesy of LAND ROVER NORTH AMERICA, INC.