Service Precautions

WARNING: To avoid injury from accidental air bag deployment, read and carefully follow all SERVICE PRECAUTIONS. Deactivate air bag system before performing any repairs. See DISABLING & ACTIVATING AIR BAG SYSTEM .

Before proceeding with diagnosis, the following precautions must be followed:

When disconnecting battery cables, always disconnect negative battery cable first.
Deactivate air bag system before performing any repairs. See DISABLING & ACTIVATING AIR BAG SYSTEM .
Ensure at 20 minutes has passed after disconnecting battery cables before starting repair work near air bag system components. Not waiting specified time could cause activation of air bag modules.
DO NOT drop removed air bag module.
Store removed air bag with trim cover facing up and away from loose objects.
Always handle air bag module with trim cover facing away from your body.
Always wear safety glasses for eye protection.
DO NOT wear rings, watches, loose hanging jewelry or loose clothing.
DO NOT store removed steering column assembly on end or in an unsupported position that would allow it to bend.
DO NOT strike end of steering column or intermediate shaft for any reason. Doing so could cause components to compress.
DO NOT attempt to disassemble or repair intermediate shaft compression joint. Compression joint is used to determine serviceability of the steering column assembly after a collision impact.
DO NOT allow steering wheel to rotate when steering column "U" joints are not connected. Air bag system rotary coupler or other internal components could be damaged.