Brake Pedal Switch: Input/Output
With the brake pedal and the clutch pedal in the rest position, the cruise control ECU receives 12 Volts. See BRAKE PEDAL & CLUTCH PEDAL SWITCHES CRUISE CONTROL ECU OPERATING PARAMETERS table.
With the brake pedal pressed, the cruise control ECU receives 0 Volts and a low voltage logic signal from the BCU.
NOTE:
If the clutch pedal is pressed, 0 Volts are present at the cruise control ECU irrespective of brake pedal position.
BRAKE PEDAL & CLUTCH PEDAL SWITCHES CRUISE CONTROL ECU OPERATING PARAMETERS (1)
| Pin No. | Condition | Volts | Ohms | ||
|---|---|---|---|---|---|
| 1 | Ignition in position II, brake pedal released, clutch pedal released | 12 | - | ||
| 1 | Ignition in position II, brake pedal pressed, clutch pedal released | ..... | More than 10,000 | ||
| 1 | Ignition in position II, brake pedal released, clutch pedal pressed | ..... | More than 10,000 | ||
|
|||||